Time-off balances, accruals and bulk changes
How to see and adjust an employee's paid time off, personal time and expiring time, set up or rebuild accrual balances, and change a setting for every active employee at once.
Last updated 26 days ago
This page covers three things on the Employees tab of the Admin Hub: the time-off balances of one employee, the accrual balances that rules such as a service bonus build up, and the Bulk Operations menu, which changes a setting for many employees at once.
Before you start. The Timeclock & Payroll module must be on. The Administrator, Timeclock Admin and Payroll Admin roles can do everything here. Requests that employees submit themselves are answered on the Supervisor tab. See Supervising punches, exceptions and time off.
The balances
Paid time off grows when payroll is calculated, if the employee's rule group has a rule of type PTO. See Payroll rule groups. The rate is not a field on this screen.
Manage time off for one employee
- On the Employees tab, choose the umbrella icon, Manage PTO, on the employee's row. The Time Off Management dialog opens with the employee's name.
- Adjust a balance, add a grant, or add a leave entry, as described below.
Adjust paid time off
- Under Quick Adjust PTO:, choose -8h, -4h, +4h or +8h. The change is applied at once.
- For another amount, use Custom Adjustment:. Enter the hours, with a minus sign to take hours away, add a reason if you want one, and choose Apply. The reason is written to the server log with the name of the person who made the change; it is not shown in QuantumOps.
The adjustment changes the accrued hours, so the available hours move by the same amount. An adjustment that would take the available hours (accrued less used) below zero is refused, and the message shows the hours available. Leave entries are not stopped at zero, so check Available before you add one.
Adjust personal time
- Under Quick Adjust Personal Time:, choose -8h or -4h to take hours away, or +8h or +16h to grant hours. Granting also records the date of the grant.
- Use Custom Adjustment: for another number of hours and choose Apply. An adjustment that would take the available personal time (granted less used) below zero is refused.
- Reset sets the granted and the used hours to zero after you confirm. It cannot be undone.
Reducing personal time never takes the granted hours below zero.
Grant expiring time
- Under Expiring Time Grants, choose Add Grant.
- Enter a Label / Description, such as Voting Leave, and the number of Hours.
- Under Expiry Mode, choose Days from now and enter the number of days, or Specific date and pick the date.
- Add Notes (optional) if you want to, then choose Add Grant.
The table lists each grant with its Label, Granted and Used hours, Remaining hours, Granted Date and Expiry Date. The Status is Active, Expiring when 7 days or fewer are left, Fully Used or Expired. The delete icon appears only on a grant that has not been used and has not expired. A grant that has been partly used cannot be deleted.
Add a leave entry
Use a leave entry to record time off that has already been approved or taken.
- Under Add Leave Entry, choose the Leave Type: PTO, Personal Time, Unpaid Leave, Sick Leave, Holiday, Bereavement or Other.
- Enter the Hours, the Start Date and the End Date.
- Under Deduct From Balance, choose where the hours come from: No Deduction (Unpaid/Holiday), the PTO balance, the personal time balance or, when there is an active grant, expiring time. Each choice shows the hours that are available.
- Select or clear Paid Leave.
- Enter a reason in Reason/Notes. It is required for PTO, Personal Time and Unpaid Leave entries, and optional for the others.
- Choose Add Entry.
The entry is saved as approved. When you deduct from the PTO or personal time balance, the hours are added to that balance's used hours straight away. Choosing expiring time records the entry but does not reduce the grant, and the message tells you to adjust the grant by hand.
A leave entry records the time off, moves the balance and is paid. For an employee paid by the hour, an entry that is approved, has Paid Leave checked and is not of the Unpaid Leave type is paid at the hourly rate for its Hours, in the pay period its dates fall in; an entry that runs across two pay periods is shared out by day. Clear Paid Leave, or choose Unpaid Leave, to record time that is not paid. An employee paid from salary is not paid anything more, because the salary already covers those days.
In a Colombian rule group, a paid Sick Leave entry (and a Maternity or Paternity one) is the exception: payroll treats it as incapacity leave, the same as an incapacity request in the payroll wizard, so the hourly rate is not paid in full for it. An employee paid by the hour is paid 66.67% of the entry's Hours for Sick Leave and 100% for Maternity and Paternity; an employee paid from salary has the unpaid share of the days taken off the salary (a 4-hour entry counts as half a day). See Incapacity leave. An entry has no pay percentage field. To pay incapacity at another percentage, add it with Add Incapacidad in the payroll wizard instead. In any other rule group, and for vacation, personal and the other paid types, a checked entry is paid at the full hourly rate.
Do not add the same days again with Add PTO Day in the payroll wizard. Payroll never pays a day twice: a day that an approved request already covers is not paid again through an entry. But the two records say the same thing twice, so keep one of them. See How pay is calculated.
Leave History lists the entries with their dates, type, hours, status and reason. Use the delete icon and confirm to remove one. Deleting an entry gives the hours back to the balance they came from. For an entry charged to expiring time nothing is given back, and the message says to adjust the grant by hand.
Bulk operations
Bulk Operations is a menu above the employee list. It changes a setting for many employees at once. Most items apply to all active employees, and nothing on the screen undoes them, so check the number of employees the dialog shows before you go on. Employees who are inactive are skipped.
Add time off in bulk
- Choose Bulk Issue Time Off.
- In the table, enter the PTO Hours to Add and the Personal Hours to Add for each employee. Each row also shows the current PTO Balance and Personal Balance.
- Choose Issue Time Off.
The hours are added to the existing balances. They never replace them. Leave a row at 0 to skip that employee. The button is available once at least one number is above zero, and the footer counts the employees that will be updated.
Grant or reset personal time for everyone
- Grant Personal Time (All) asks you to confirm, then adds 16 hours of personal time to every active employee.
- Reset Personal Time (All) asks you to confirm, then sets the granted and the used hours of every active employee to zero. It is meant for the end of a year and cannot be undone.
Grant expiring time to everyone
- Choose Grant Expiring Time (All).
- Enter the Label / Description, the Hours Per Employee and the Days Until Expiry.
- Choose Grant to All.
Every active employee gets a grant of the same size. The dialog shows the date it expires and the number of employees.
Change overtime, assignments and pay settings
- Set All to Period-Wide OT and Set All to Per-Week OT each ask you to confirm. Only the employees who are not already on that mode are changed. The two modes are explained on Payroll employees. Employees in a Colombian rule group are always counted per week, whatever this setting says. See Overtime and premiums.
- Assign Rule Group opens Bulk Assign Rule Group. Choose the Rule Group and then Apply to All. The first choice in the list, No Rule Group (Remove Assignment), takes the rule group away from everyone, and they then get no deductions or allowances.
- Assign Schedule opens Bulk Assign Schedule. Choose a Schedule Template and then Apply to All. This sets the shared shift pattern of each employee, not the pay schedule. See Employee schedules.
- Set Salary Mode opens Bulk Set Salary Calculation Mode. Choose Salary-Based Calculation, where pay comes from the salary and punches only raise exceptions, or Hourly / Punch-Based Calculation, where pay comes from the punches and the hourly rate. The dialog shows how many employees use each mode today.
- Set Missed Time Deduction opens Bulk Set Missed Time Deduction. Choose Enable Auto-Deduction, which takes money off the salary when hours are under what is expected, or Disable Auto-Deduction (Flag Only), which deducts nothing. A shortfall is flagged only for employees who have a variance threshold set. Both settings apply only to employees paid from salary.
Each of these dialogs ends with Apply to All and reports how many employees changed.
Accrual balances
An accrual rule, such as a service bonus or severance, adds an amount to a balance each time pay is calculated and pays it out later. See Payroll rule groups for how to make one. These three bulk operations set up the balances. Only employees with a rule group are listed, because the balances belong to the accrual rules of the group.
Initialize accrual balances
Use this when you start using accruals for people who were hired some time ago.
- Choose Initialize/Calculate Accruals. The Initialize Accrual Balances dialog opens with every eligible employee selected.
- Leave Calculate from employee hire date checked to start each balance at the hire date of the person. Clear it to use one Accrual Start Date for everyone. An employee who has no hire date uses the Accrual Start Date as well, so clear the checkbox and set the date if some of your employees have none.
- Change the selection with Select All Active or Clear Selection, or select people one by one.
- Choose the Initialize Accruals button, which shows how many employees are selected.
A balance is created for each active accrual rule in the employee's rule group. It starts from the amount the rule would have built up between the start date and today. An employee who already has a balance for a rule keeps it. When some employees fail, the message says how many.
Import starting balances
Use this to carry over balances from a previous system.
- Choose Import Starting Balances.
- In the Import Starting Accrual Balances dialog, enter a Starting Balance for each employee. Leave an employee at 0 to skip them.
- Choose Import Balances.
The number you enter for an employee is set on every accrual rule in their rule group, and it replaces the balance that was there. When a group has several accrual rules, each of them gets the same number, so use this for groups where that is what you want. Each balance records that a manual starting balance was entered, with the date and who entered it.
Recalculate from history
Use this to rebuild balances from the pay periods that were already calculated, for example after you fixed a rule.
- Choose Recalculate from History. The Recalculate Accruals from Historical Data dialog opens.
- Set Recalculate from date. Every pay period that has calculations and ends on or after that date is replayed.
- Select the employees with Select All and Clear, or one by one.
- Check the confirmation box that begins "I understand this will rebuild".
- Choose Recalculate, the button that shows how many employees are selected.
This takes back the contributions of the selected employees' accrual balances and rebuilds them from the periods that end on or after the date. A period counts when it has calculations, whatever its status (a period a date change sent back to Draft keeps its calculations, and they count). The amounts replayed are the contributions each calculation recorded, so fixing a rule changes nothing here until the periods are recalculated. Starting balances and payouts already recorded are kept, so a rebuilt balance is its starting balance plus the contributions replayed and the interest, less the payouts already made. It cannot be undone, and it needs the checkbox.
Interest on accrual balances is brought up to date for all employees while it runs, not only the selected ones.
If there is no such period, nothing is changed and an error message says so. When it finishes, the dialog reports how many periods were processed, how many employees were affected and the total of the contributions.
Balances and payouts that are due show on the Accrual Tracking sub-tab of the Payroll tab. See Pay periods.
Related
Was this helpful?
More in Timeclock and payroll
Clocking in and outRequesting time off and bidding for holiday shiftsThe timeclock and payroll Admin HubPay schedulesStill need help? Ask the team